the different between hinge and door hing
Author：admin Time：2015/3/4 10:56:34
Hinge is also called the hinge is used to connect two solid, and allow between rotating machinery.
Likely hinge by movable components, or formed by folding material.
Hinges are mainly installed on the doors and Windows.
Hinge more installed on the cabinet;Mainly divides into according to the material classification, stainless steel and iron hinge hinge, to make people better enjoyment again hydraulic hinge, features a certain buffer, the greatest degree of reducing noise.
Hardware hinge to occupy the important position.Hinge is good or not directly related to the quality of the furniture, the use of the door.See the hinge on the market at present summarized as follows:
1, according to the base type is divided into take off discharge type and fixed type two kinds
2, according to arm the type of the body is divided into: slide type and cassette
3, press the door cover position is divided into full cover (bend straight, straight arm) generally cover 18 mile, half (bending, crank arm) in the cover cover 9 mm, inside (greater curvature, daqu) door all hidden inside
4, according to the design of the hinge development stage can be divided into: the force of a hinge, hinge, hydraulic buffering hinge 2 force
5, according to the hinge points: open Angle usually used 95-110, special have 45 degrees, 135 degrees, 175 degrees, and so on
6, according to the type of hinge is divided into: common one, two section force hinge hinge, short arm, 26 cup miniature hinge hinge, marbles, aluminum box hinge, hinge, glass door hinge, a special Angle rebound damping hinge hinge, American hinge, etc.
7, use a room according to different divided into the following four:
1. The general hinge
Is that we often say that the general hinge, it can be used in the cabinet door, window, door, etc.Hinges, from the material can be divided into: iron, copper, stainless steel.From the specification can be divided into: 2 "(50 mm), 2.5" (65 mm),
3 "(75 mm), 4" (100 mm), 5 "(125 mm), 6" (150 mm), 50-65 - mm hinge is suitable for the cabinets, wardrobe door, 75 mm is applicable to the window and screen door, 100-150 mm is suitable for the door of wooden door,
Aluminum alloy door.The disadvantage of ordinary hinge is does not have the function of the spring hinge, hinge after installation must be fitted with a variety of touch beads, or the wind will blow the door plank.In addition to measures hinge, flag hinge, H hinge hinge and other special them according to various
Special demand of wood door can be removed installation, convenient, restricted by direction, when used by left and right.
2. Spring hinge
Mainly for the closet door, closet door, it generally requires for 18-20 mm plate thickness.Points from the material, can be divided into: galvanized iron, zinc alloy.From the performance points, can be divided into: need to make hole, does not need to make hole two kinds.Don’t need to play
Hole is what we call bridge type hinge.Looks like a bridge, bridge type hinge, hinge so commonly known as the bridge.Its characteristic is not to need to drill hole in the door, and should not be restricted style.The specifications are: small, medium, large.
Need to make hole, is now commonly used in the spring on the cabinet door hinge, etc.It features: door plank to make hole, style being limited by the hinge of the door, will not be blown open after the door closed, and not need to install a variety of touch spiders.Specifications are as follows:
26, & 35 &.One can take off discharge type directional hinge hinge and don’t take off discharge type astatic.Such as the hinge of the 993 series is directional hinge can take off discharge type, and 304 series is not take off discharge type spring hinge from shape
Can be divided into: on the cover (or arm straight, straight curved) half a cap (or crank arm, bend) in the medial (or daqu, big bend) hinge with adjusting screw, up and down, left and right sides adjust the height, thickness of plate, two screws on the hole side
Fixed hole distance is 32 mm, diameter of the side and on both sides of the plate distance to 4 mm (drawing).In addition, the spring hinge and all kinds of special specifications, such as: the inside of the 45 degree Angle hinge, the lateral Angle of 135 degrees of hinge, hinge open Angle of 175 degrees.